Home > Products > Screw Conveyor > Inclined Screw Conveyor > Inclinded Screw Conveyor for Cement

Inclinded Screw Conveyor for Cement

Min. Order:
1
Share:
  • Product Description
Overview
Product Attributes

Model No.QSI

Customized design and build Inclined Screw Conveyor for

Material: Cement

Capacity: 1500 kg/hour

Location: Bag Unloading System



Production General Description

Inclined screw conveyors typically operate from slightly above the horizontal position to 45-degrees from the horizontal position. As the degree of incline increases, conveying efficiency is reduced and horsepower requirements increase due to the effects of gravity and bulk material fall back.


Quantum have designed and installed both vertical and inclined Screw Conveyor systems. It is recommended to design all incline conveyors without using an intermediate bearing, if possible and to keep incline to less than 75 degree or optimum efficiency. Whether your application requires a tubular inclined conveyor or trough conveyor, Quantum will select the most suitable conveyor for your application that is suited to the material characteristics, environment, length conveyed and your specific needs such as clean down and residue.


The following are design and construction features to consider when designing an inclined screw conveyor.

Incline Up to 10-Degrees – Loss in conveying efficiency is minimal on inclines up to 10-degrees. A screw conveyor with U-trough and full pitch screw is sufficient for most applications. Loss in efficiency can be overcome by increasing the speed of the screw conveyor, increasing the diameter of the screw conveyor or reducing the pitch of the screw.

Incline Between 10 and 20-Degrees – Loss in conveying efficiency is typically between 10 and 40-percent on inclines up to 20-degrees. A screw conveyor with U-trough and 2/3-pitch screw is sufficient for most applications. Loss in efficiency can also be overcome by increasing the speed or the diameter of the screw conveyor. Additional horsepower is required to overcome gravity and bulk material fall back.

Incline Between 20 and 30-Degrees – Loss in conveying efficiency is typically between 10 and 70-percent on inclines up to 30-degrees. A screw conveyor with tubular housing and reduced pitch screw (1/2 or 2/3) is recommended for most applications. Loss in efficiency can also be overcome by increasing the speed or the diameter of the screw conveyor. Additional horsepower is required to overcome gravity and bulk material fall back.

Incline Between 30 and 45-Degrees – Loss in conveying efficiency is typically between 30 and 90-percent on inclines up to 45-degrees. A screw conveyor with tubular housing and reduced pitch screw (1/2 or 2/3) and larger diameter is recommended for most applications. Increasing the speed of the screw conveyor is also required. Additional horsepower is required to overcome gravity and bulk material fall back.


Specification

Quantum Standard Range

Screw Diameter (mm)

150

200

300

400

500

600

800

1000

Screw Speed (RPM)

100

50

32

23

24

20

15

10

Capacity (m3/hr)

2.4

4.3

13

20

35

50

70

100

Power Demand for 10m length (kW)

1.1

1.5

5.5

7.5

11

18.5

30

37

BD of 1000kg/m3

Trough Width

180

220

335

425

525

660

830

1040

Screw Pitch

150

200

300

400

400

450

500

650












Heating and Cooling Jackets

All our Screw Conveyors can be fitted with heating and cooling jackets utilizing steam, thermal liquids, refrigerant, water or brine. Heating or cooling can be designed by our process engineers who will recommend the most suitable size and type of conveyor for your production and needs.


Clean Design

We are familiar with the specific needs of the food and beverage industries. All our Screw Conveyors can be fitted with CIP spray balls and manifolds, with quick knockdown in mind to ensure complete clean-down where required. Screw Conveyors can be constructed from mild steel, 304 or 316 stainless steel, depending on the material being conveyed. Surface finish will be provided to suit specific requirements. All components such as IP ratings of electric motors and switches are selected with these specific requirements in mind to ensure compatibility with your operating procedures.


Typical Design Features

Shafted Screw Conveyor Unique Design



Equipment Photos

Four Types Of Screw Conveyors


After sales support

Quantum can provide a customized service contract using experienced technicians with many years` experience in servicing and troubleshooting Screw Conveyors in all states. This service ensures your equipment is functioning to its optimum capabilities and reduces down time due to parts replacement and potential damage. Our technicians have standard customer maintenance, checking and reporting procedures.

Product Categories : Screw Conveyor > Inclined Screw Conveyor

Home > Products > Screw Conveyor > Inclined Screw Conveyor > Inclinded Screw Conveyor for Cement
Email to this supplier
  • *Subject:
  • *To:
    Mr. Shaohua Wu
  • *Email:
  • *Message:
    Your message must be between 20-8000 characters
Send Inquiry
*
*

Related Products List

Home

Product

Phone

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send